Performance Comparison:
| Country | Speed |
|---|---|
| Shaft Modular | |
| RGL | 130 seconds |
| Germany | 646 seconds |
| Japan | 750 seconds |
*The information from RGL existing equipments.
Worm Teeth Cutting Test :
| Worm Material : | S45C | 
Hexagonal part machining |
|---|---|---|
| Module : | M3 | |
| Length : | 50mm | |
| Accuracy : | 5µm / 100mm | |
| Time : | Shortened by 70% |
Surpasses the Speed and Accuracy of Whirl Wind Type Milling Machine
Applicable Jobs
Worm / Dual-lead Worm / Variable-lead Worm / Tapered Worm / Lead Screw /
Spline Shaft with 6,8 or 10 Grooves/ Emove Sharp Corners on Thread / keyway.
Spline Shaft Work Pice
Work Pice
(To Match With Bevel Gear)
Worm Shaft
Work Pice
DUAL-LEAD Work Piece- Hexagonal part machining
Cavex
Grinding Wheel Machining
Optimized Machine Structure High Rigidity !
Deformation Free
The structural parts of the machine, such as the base and saddle, are analyzed by using the advanced Finite element Analysis software. When the structural parts are subjected to a maximum load, there is almost no deformation on the base and a minimum deformation of less than 10µm on the saddle. This gives a proof for the unmatched structural rigidity of DS-1000.
Machining Applications:
- Thread Milling (Single Lead, Dual Lead, Taper, Hypoid Gear And Neiman Type Machining)
- Spline Shaft Machining.
- Grinding Wheel Slotting.
- For Removing Sharp Corners on the Threads.(DS-1000HZ only)
- Applicable for Machining Keyways.(DS-1000HZ only)
- Polygon Milling Operations.(DS-1000HZ only)